MR008M PLC Controlled Pneumatic and Hydraulic Training Workbench Educational Equipment Demonstrational Equipment Mechatronics Training Equipment1.Equipment Introduction1.1 Overview
The experimental device adopts a double-sided structure, that is, one experimental table provides a place for two groups of four students to conduct pneumatic and hydraulic tests. It can conduct comprehensive pneumatic and hydraulic experiments on both sides at the same time, optimize shared resources, and improve product performance. Its overall structure is simple and practical.
The training equipment is iron double matt dense spray pattern, beautiful, durable and practical. The basic configuration is as follows: 1 set of pneumatic training components; 1 set of pneumatic PLC control module; 1 low-noise air compressor; 1 set of hydraulic training components; 1 set of hydraulic PLC control module; 1 air pump. The optional configuration is a computer.
1.2 Features
This training system is equipped with a AC motor system with oil pressure setting function. You can set the safe working pressure of the output oil pressure. Cooperate with all commonly used hydraulic components: Each hydraulic component is equipped with a mounting plate, which can be easily and freely placed in the aluminum alloy hydraulic component on the panel (aluminum alloy structure with "T" slot on the panel). The oil ring adopts a quick-change joint; easy to disassemble and assemble, no leakage.
With this set of training equipment, you can conduct pneumatic control and hydraulic control circuits and their corresponding basic application experiments. You can also integrate them to conduct the following experiments: realize gas-electric control, gas-liquid control, electric-hydraulic control, and gas-electric-hydraulic integrated control.
2.Technical ParametersTotal power supply: AC 220V 50Hz
Dimensions: 1400mm*950mm*1800mm
Weight:850KG
3.Component List And Detailed Introduction3.1 Hydraulic Main Part
| No. |
Name |
| 1 |
Frame |
| 2 |
Universal wheel |
| 3 |
Hydraulic station |
| 4 |
Air pump |
| 5 |
Power Panel |
| 6 |
Cabinet |
| 7 |
Oil pipe |
| 8 |
Power box |
| 9 |
PLC box |
| 10,11 |
Button box |
| 12,13,14 |
Relay box |
3.2 Hydraulic Components
| No. |
Name |
| 1 |
Double-acting hydraulic cylinder |
| 2 |
Throttle valve Dv8/2 |
| 3 |
Direct acting relief valve DBDH6P/100 |
| 4 |
Three-position four-way solenoid directional valve (M) 4WE6G/24N |
| 5 |
Three-position four-way solenoid directional valve (0) 4WE6E/25V |
| 6 |
Three-position four-way solenoid directional valve (Y) 4WE6J/24V |
| 7 |
Three-position four-way solenoid directional valve (H) 4WE6H/24N |
| 8 |
Travel valve 4KMR6D050B |
| 9 |
Two-position four-way solenoid reversing valve 4WE6D /24V |
| 10 |
Two-position four-way manual reversing valve 4WMMGD50B |
| 11 |
Speed regulating valve 2FRM5/6Q |
| 12 |
Pilot relief valve DB10/100 |
| 13 |
Hydraulic control check valve |
| 14 |
Check valve |
| 15 |
Pressure relay |
| 16 |
Glycerin pressure gauge |
| 17 |
Single-phase throttle valve |
| 18 |
Capacitive sensor |
| 19 |
Inductive sensor |
| 20 |
Photoelectric sensor |
| 21 |
Micro switch |
| 22 |
4/3 manual reversing valve (O) |
| 23 |
4/3 manual reversing valve (H) |
| 24 |
4/3 manual reversing valve (M) |
| 25 |
Three-way |
| 26 |
Three-way |
3.3 Pneumatic Main Part
| No. |
Name |
| 1 |
Frame |
| 2 |
Universal wheel |
| 3 |
Hydraulic station |
| 4 |
Air pump |
| 5 |
Power panel |
| 6 |
Cabinet |
| 7 |
Operation panel |
| 8 |
Oil pipe |
| 9 |
Power box |
| 10 |
PLC box |
| 11 |
Counter box |
| 12,13 |
Button box |
| 14,15,16 |
Electrical box |
3.4 Pneumatic Components
| No. |
Name |
| 1 |
AC2000 triplex |
| 2 |
Pressure reducing valve AR2000 |
| 3 |
Manual valve 4H210-08 |
| 4 |
Single solenoid valve (two-position five-way) 4V210-08 (DC24V) |
| 5 |
Pneumatic one-way throttle valve RE-02 |
| 6 |
Sequence valve KPSA-G1/8 |
| 7 |
Single-acting cylinder MSAL25*100 |
| 8 |
Double-acting cylinder TMAL25X100 |
| 9 |
Micro switch QZ-1703 |
| 10 |
Two-position five-way double solenoid valve 4V220-08B |
| 11 |
Solenoid valve 4V230-08 24v |
| 12 |
Two-position five-way single air control valve 4A21008 |
| 13 |
Two-position five-way double air control valve 4A22008 |
| 14 |
MOV-02 mechanical valve |
| 15 |
MOV-03A button mechanical valve |
| 16 |
Shuttle valve or gate shuttle valve ST-02 |
| 17 |
Quick exhaust valve QE-02 |
| 18 |
Air tank parts |
| 19 |
Pneumatic six-way |
| 20 |
Pneumatic one-way valve AKHO6-00 |
| 21 |
MROO8MPLC control pneumatic and hydraulic training bench air compressor |
3.5 Accessories
| No. |
Name |
| 1 |
2mm safety electrical cable |
| 2 |
All-in-one computer |
| 3 |
Mouse |
| 4 |
Keyboard |
| 5 |
USB cable |
| 6 |
Raw tape |
| 7 |
Trachea |
| 8 |
Trachea connector |
| 9 |
Air plug |
| 10 |
Muffler |
| 11 |
Hexagon wrench |
| 12 |
Wire stripper |
| 13 |
Screwdriver |
| 14 |
Wrench |
| 15 |
Pneumatic check valve |
- Experiment list
Experiment 1 Hydraulic station introduction experiment
Experiment 2 Two-position four-way manual valve operation experiment (hydraulic)
Experiment 3 Three-position four-way manual valve operation experiment (hydraulic)
Experiment 4 Two-position four-way solenoid valve operation experiment (hydraulic)
Experiment 5 Speed control valve operation experiment (hydraulic)
Experiment 6 Pressure relay operation experiment (hydraulic)
Experiment 7 Three-position four-way solenoid valve operation experiment (hydraulic)
Experiment 8 PLC control three-position four-way solenoid valve operation experiment (hydraulic)
Experiment 9 Travel valve operation experiment (hydraulic)
Experiment 10 Throttle valve operation experiment (hydraulic)
Experiment 11 Study on the relationship between throttle valve opening and closing degree and pressure difference (hydraulic)
Experiment 12 Switch ball valve operation experiment (hydraulic)
Experiment 13 PLC control three-position five-way solenoid valve counting operation experiment (pneumatic)
Experiment 14 PLC control three-position five-way solenoid valve delay operation experiment (pneumatic)
Experiment 15 Two-position five-way manual valve operation experiment (pneumatic)
Experiment 16 Rotation Button valve operation experiment (pneumatic)
Experiment 17 Mechanical valve operation experiment (pneumatic)
Experiment 18 Two-position five-way single electric control solenoid valve operation experiment (pneumatic)
Experiment 19 Two-position five-way single air-controlled solenoid valve operation experiment (pneumatic)
Experiment 20 Two-position five-way double air-controlled solenoid valve operation experiment (pneumatic)
Experiment 21 Quick exhaust valve operation experiment (pneumatic)
Experiment 22 Pneumatic one-way throttle valve operation experiment (pneumatic)
Experiment 23 One-way pressure sequence valve operation experiment (pneumatic)
Experiment 24 Shuttle valve (or gate type) operation experiment (pneumatic)
